FEATURED PRODUCT



eSmartAccess™  – Your Temperature Hardened Ethernet Solutions for -40F to +185F Operation

 

CONTACT INFORMATION OFFICE CELL EMAIL
Westell Technologies Sales:  Tom Wessling 708-301-0824 708-308-3596 twessling@westell.com
Westell Technologies Sales:  Mark House 303-791-0878 720-480-3935 mhouse@westell.com
Westell Ethernet Sales & Applications:  Jeff Beauchaine  508-244-1639  508-244-1639  jbeauchaine@westell.com 
Westell Technologies Product Training & Support:  Tom Tower 303-587-0501 303-587-0501 ttower@westell.com
Westell Technologies Engineering Application Support:  Bill Johnston 815-337-0146 815-262-9034 bjohnston@westell.com
Inside Sales 800-377-8766, 1
Technical Support 800-377-8766, 2

 

 

 
PRODUCT DOCUMENTATION
 
Ethernet Ancillary, Cables
  ETHERNET ACCESS PRODUCTS   ANCILLARY
DS3   CABLES
  DS3 NIU and MOUNTINGS Copper/Fiber Connectivity and Protection
T1/DS1 NIUs, Repeaters   FIBER SYSTEMS, CP550 AND QUADJACK
  DS1 NIU AND PMNIU   JACK PANELS & CONNECTION BLOCKS
  T1 REPEATER UNITS   VIRTUALEDGE ENCLOSURE AND PANEL
D4 Indoor Rack Mount Enclosures
  D4 CHANNEL UNITS AND DIGITAL DATA   SWINGRACKS - for WALL MOUNTING ROUTERS, SWITCHES and MUXES
Mountings and Accessories Outdoor Enclosures
  1 & 2 CIRCUIT MOUNTINGS (200 MECHANICS) and ACCESSORIES   ENCLOSURES, HEAT DISSIPATION, BOXER™
  4 & 6 CIRCUITS (200 MECHANICS) MOUNTINGS and ACCESSORIES   WALL MOUNT OUTDOOR ENCLOSURES
  8 CIRCUITS (200 MECHANICS) MOUNTINGS and ACCESSORIES Power Supplies, Power Distribution and Fuses
  12-14 CIRCUITS (200 MECHANICS) MOUNTINGS and ACCESSORIES   POWER SUPPLIES AND RING GENERATORS
  22-28 CIRCUITS (200 MECHANICS) MOUNTINGS and ACCESSORIES   FUSE AND ALARM PANELS
Analog   FUSES & BREAKERS FOR DC POWER DISTIBUTION
  ANALOG VOICE UNITS AND MOUNTINGS Remote Monitoring
     REMOTE MONITORING AND TEST

 

Unless indicated otherwise, click on Model Number to view the Technical Practice.
Ethernet Access Products
Engineering Tool White Paper:  Westell eSmartAccess™ Ethernet in Backhaul
Model Number Item Description
ES8000
Datasheet
Install Guide		 eSmartES™, ES8000 Series Ethernet Edge Switch. These managed switches are designed especially for "edge" applications, deploying the latest in reliability and security for harsh environments, on the perimeter of the network where the Smart Grid and the industrial devices are connected.
ES8100
Datasheet
Install Guide		 eSmartES™, ES8100 Series Ethernet Edge Switch with SiteVu™. These managed switches are designed especially for "edge" applications, deploying the latest in reliability and security for harsh environments, on the perimeter of the network where the Smart Grid and the industrial devices are connected.
A90-NI8002 eSmartJack™ Ethernet Network Interface Unit w/ Westell Edge Operating System (WEOS), SiteVu telemetry, can be configured with two 10/100/1000Mb ports, two GigE optical ports or a combination of the two, has a Craft port, a Ethernet management port and a GigE monitor port, all accessible at the front panel.
A90-ES8006 eSmartES™, Ethernet Managed Switch, Industrial Hardened Layer 2, a SmartES Edge Switch, 6 port, operating temperature range -40° to 185°F
A90-ES8008G eSmartES™, Ethernet Managed Switch, Industrial Hardened Layer 2, a SmartES Edge Switch, 8 port, operating temperature range -40° to 185°F, with 2 GigE ports
A90-ES8008G-LC2 eSmartES™, Ethernet Managed Switch, Industrial Hardened Layer 2, a SmartES Edge Switch, 8 port, operating temperature range -40° to 185°F, with 2 LC Fiber GigE SM 1310nm, 20Km ports
A90-ES8008G-SC2 eSmartES™, Ethernet Managed Switch, Industrial Hardened Layer 2, a SmartES Edge Switch, 8 port, operating temperature range -40° to 185°F, with 2 SC Fiber GigE SM 1310nm, 20Km ports
A90-ES8008 eSmartES™, Ethernet Managed Switch, Industrial Hardened Layer 2, a SmartES Edge Switch, 8 port, operating temperature range -40° to 185°F
A90-ES8008-LC3 eSmartES™, Ethernet Managed Switch, Industrial Hardened Layer 2, a SmartES Edge Switch, 8 port, operating temperature range -40° to 185°F, with 2 LC Fiber SM 1310nm, 30Km ports
A90-ES8008-SC3 eSmartES™, Ethernet Managed Switch, Industrial Hardened Layer 2, a SmartES Edge Switch, 8 port, operating temperature range -40° to 185°F, with 2 SC Fiber SM 1310nm, 30Km ports
A90-ES8106 eSmartES™, Ethernet Managed Switch, Industrial Hardened Layer 2, a SmartES Edge Switch, 6 port, operating temperature range -40° to 185°F, with SiteVu telemetry system and Westell Edge Operating System (WEOS)
A90-ES8106 eSmartES™, Ethernet Managed Switch, Industrial Hardened Layer 2, a SmartES Edge Switch, 6 port, operating temperature range -40° to 185°F, with SiteVu telemetry system and Westell Edge Operating System (WEOS)
A90-ES8108 eSmartES™, Ethernet Managed Switch, Industrial Hardened Layer 2, a SmartES Edge Switch, 8 port, operating temperature range -40° to 185°F, with SiteVu telemetry system and Westell Edge Operating System (WEOS)
A90-ES8104-SC3 eSmartES™, Ethernet Managed Switch, Industrial Hardened Layer 2, a SmartES Edge Switch, 4 port, operating temperature range -40° to 185°F with 2 SC fiber SM 1310nm 30km ports, with SiteVu telemetry system and Westell Edge Operating System (WEOS)
A90-ES8108-LCM eSmartES™, Ethernet Managed Switch, Industrial Hardened Layer 2, a SmartES Edge Switch, 8 port, operating temperature range -40° to 185°F with 2 LC fiber MM 1310nm 2km ports, with SiteVu telemetry system and Westell Edge Operating System (WEOS)
A90-ES8108-SCM eSmartES™, Ethernet Managed Switch, Industrial Hardened Layer 2, a SmartES Edge Switch, 8 port, operating temperature range -40° to 185°F with 2 SC fiber MM 1310nm 2km ports, with SiteVu telemetry system and Westell Edge Operating System (WEOS)
A90-ES8108-STM eSmartES™, Ethernet Managed Switch, Industrial Hardened Layer 2, a SmartES Edge Switch, 8 port, operating temperature range -40° to 185°F with 2 ST fiber MM 1310nm 2km ports, with SiteVu telemetry system and Westell Edge Operating System (WEOS)
A90-ES8108-LC3 eSmartES™, Ethernet Managed Switch, Industrial Hardened Layer 2, a SmartES Edge Switch, 8 port, operating temperature range -40° to 185°F with 2 LC fiber SM 1310nm 30km ports, with SiteVu telemetry system and Westell Edge Operating System (WEOS)
A90-ES8108-SC3 eSmartES™, Ethernet Managed Switch, Industrial Hardened Layer 2, a SmartES Edge Switch, 8 port, operating temperature range -40° to 185°F with 2 SC fiber SM 1310nm 30km ports, with SiteVu telemetry system and Westell Edge Operating System (WEOS)
A90-ES8108G eSmartES™, Ethernet Managed Switch, Industrial Hardened Layer 2, a SmartES Edge Switch, 8 port (6+2G), operating temperature range -40° to 185°F with 2 GigE ports, SiteVu telemetry system and Westell Edge Operating System (WEOS)
A90-ES8108G-LCM eSmartES™, Ethernet Managed Switch, Industrial Hardened Layer 2, a SmartES Edge Switch, 8 port (6+2G), operating temperature range -40° to 185°F with 2 LC fiber GigE MM 850nm, 550m ports; with SiteVu telemetry system and Westell Edge Operating System (WEOS)
A90-ES8108G-SCM eSmartES™, Ethernet Managed Switch, Industrial Hardened Layer 2, a SmartES Edge Switch, 8 port (6+2G), operating temperature range -40° to 185°F with 2 SC fiber GigE MM 850nm, 550m ports; with SiteVu telemetry system and Westell Edge Operating System (WEOS)
A90-ES8108G-LC2 eSmartES™, Ethernet Managed Switch, Industrial Hardened Layer 2, a SmartES Edge Switch, 8 port (6+2G), operating temperature range -40° to 185°F with 2 LC fiber GigE SM 1310nm, 20km ports; with SiteVu telemetry system and Westell Edge Operating System (WEOS)
A90-ES8108G-SC2 eSmartES™, Ethernet Managed Switch, Industrial Hardened Layer 2, a SmartES Edge Switch, 8 port (6+2G), operating temperature range -40° to 185°F with 2 SC fiber GigE SM 1310nm, 20km ports; with SiteVu telemetry system and Westell Edge Operating System (WEOS)
A90-ES8003G
Datasheet
Install Guide		 eSmartES™, Ethernet Managed Switch, Industrial Hardened Layer 2, a SmartES Edge Switch, operating temperature range -40° to 185°F with 3 port GigE with 2 SFP ports; with SiteVu telemetry system and Westell Edge Operating System (WEOS)
A90-ES8003G-C
Datasheet
Install Guide		 A90-ES8003G preinstalled in a A90-EMAS01 case
A90-ES8003G-CA1 A90-ES8003G preinstalled in a A90-EMAS01 case kitted with A90-204100-P
A90-A90-SFP1FX-M2-31 SFP Industrial Temp, 100FX Multi Mode 2KM 1310NM LC
A90-SFP1FX-30-31 SFP Industrial Temp, 100FX Single Mode 30KM 1310NM LC
A90-SFP01G-M5-85 SFP Industrial Temp, 1 GIG Multi Mode 550M 850NM LC
A90-SFP01G-20-31 SFP Industrial Temp, 1 GIG Single Mode 20KM 1310NM LC
A90-SFP01G-40-31 SFP Industrial Temp, 1 GIG Single Mode 40KM 1310NM LC
A90-SFP01G-80-55 SFP Industrial Temp, 1 GIG Single Mode 80KM 1550NM LC
A99-SCC2418ES-1 Enclosure, Westell SmartCom Cabinet, 5 Port Ethernet Managed Switch W/PoE Port, provides uninterruptable 24Vdc to power Ethernet Connectivity and External Radios, Site Monitoring, Wire Mesh Backplane for mounting Radio Equipment, Automatic Battery backup, rectifier and charger.
ECP528DP
Datasheet
Install Guide		 eCellPack™, 8-Pos HDSL, T1 & DDS Enclosure; 8-Position Universal Weatherproof Metal Cabinet Enclosure w/ 5-pin drop-side protection for 2 POTS and 8x200-type or 4x400-type cards for HDSL, T1 and DDS; 14H, 18W, 8D; pole or wall mount w/optional Ethernet lightning protection and fiber splice tray and storage rack for up to 12 fibers, prewired door alarm switches for both doors (for Ethernet services)
CP528 Enclosure, Outdoor, Pole or Wall Mount, 8 Slot T1, DS1, HDSL and 2 POTS lines w/Network side and Customer side 5-Pin Protection sockets, network connections Wire wrap, Customer connections RJ48C/S or screw term. w/RJ11 or screw term for voice/analog.
DS3 NIUs and Mountings
Engineering Tool Westell DS3/DSX-3 Termination Engineering Configuration Tool
Engineering Tool  Westell DS3/DSX-3 Product Overview
Engineering Tool   Westell DS3 SHELF POWERING CONNECTIONS
Model Number Item Description
522-04 DS3, DSX-3 Jack Access Card With Breaking and Monitoring Access, Jack function controlled by rotary switch w/ function indicators.
522-10I2 MD Replaced by 522-10I3
522-10QI2 MD - Replaced by 522-10QI3
522-10I3 DS3, NIU, With Performance Monitoring, Pattern generator, Signal Regeneration, 90 day history, remote and local loopback and real time status, power failure cut-thru, Remote and local prov.,TL1 command response.
522-10QI3 DS3, NIU, With Performance Monitoring, Pattern generator, Signal Regeneration, 90 day history, remote and local loopback and real time status, power failure cut-thru, Remote and local prov.,TL1 command response, Password Protected.
DBMA200-03 DS3 Mounting 3-Pos Non-Locking, High Density Mechanics
DBMA200-03FA DS3 Mounting 3-Pos Front Access Non-Locking, High Density Mechanics
DBMA200-03L4 DS3 Mounting 3-Pos Locking, High Density Mechanics
DBMA200-01 DS3 Mounting 1-Pos Front Access Non-Locking, High Density Mechanics
DBMA200-01L4 DS3 Mounting 1-Pos Locking Cover, High Density Mechanics
DBMA200-12 DS3 Mounting 12-Pos, High Density Mechanics
DBMA200-24 DS3 Mounting 24-Pos, High Density Mechanics
DBMAWB-24 DBMA200-12/24 Wall Bracket Assembly
DS1 NIU and PMNIU
Model Number Item Description
5712I2 NIU, DS1, DNI5712I2, 200 Mech unit terminates DS1High Capacity Digital Services at the Customer Prem. Local and remote LB, Switchable RX Regen, Bantam Jacks for DSX testing,
520-10SWI3 NIU, DS1, Combo Office Repeater, Line Repeater and NIU; non-PM DS1 Combination Office Repeater, Line Repeater and NIU by option
A90-311535 NIU, w/PM, 200 Mech, Remote and local LB, Xmit and Rec Regens, Test pattern generator, NPRM, AIS-CI, RAI-CI, DB9 RS-232 Craft Interface, Span or local Power, Bantam Mon jacks, Temp. hardened
A90-312552 NIU, DS1, 200 Mechanics, Interface between a T1 metallic span (or other DS1 facility) and the Customer Premises Equipment (CPE), LB testing , Switchable TX and RX Regens, Monitor and Break Bantam Jacks
A90-312870 NIU, DS1, 200 Mechanics, Interface between a T1 metallic span (or other DS1 facility) and the Customer Premises Equipment (CPE), LB testing , Monitor and Break Bantam Jacks
B90-311560 NIU, w/PM, 200 Mech, Remote and local LB, Xmit and Rec Regens, Test pattern generator, NPRM, AIS-CI, RAI-CI, DB9 RS-232 Craft Interface, Span or local Power, Bantam Mon jacks, Temp. hardened, w/Thru Power.
B90-311580 PMNIU, DS1, 200 Mech.,real-time Performance monitoring, LB testing, Pattern generator, Switchable regens, Front panel test and monitor, remote provisioning and query, more
B90-311520 MD Oct 2011 - Replaced by B90-311610
B90-311610 NIU, DS1 w/PM, 200 Mech, LBO or self-aligning LBO CPE to Net, AIS-CI and RAI-CI, NPRM, SPRM, Pattern Generator, Local and Remote access for LB, Prov., and PM downloads, Bantam Monitor Jacks, span or local pwr, 90 day PM storage, expanded Event and Alarm Logs.
D90-311670 NIU, w/PM, 200 Mech, Remote and local LB, Xmit and Rec Regens, Test pattern generator, NPRM, AIS-CI, RAI-CI, DB9 RS-232 Craft Interface, Span or local Power, Bantam Mon jacks, Temp. hardened
A90-310004G MD - Replaced by A90-310027
A90-310027 NIU, DS1, Stand-alone, Fault Locate @ 909Ohms 1uf w/Bantam jack, Span/local Pwr., Loop or Thru Power, Thru Power Options for 24/46/68 Vdc, Bantam Monitor Jacks, TP’s for CPE volts and Span Current, Remote/local LB, RX Regen. 
A90-31214C  Card, DS1, 200 Mechanics, Cut Thru Card, Direct cut-thru 
STATEDGE-T1  Unit, DS1, Stand-alone, TI Status Indicator Unit 
HWM-T01  MD June 2011 - No Replacement
T1 Repeater Units
Model Number Item Description
A90-RH239H4R Repeater, HDSL4, Encapsulated Adtran 1223445L2 repeater, can be placed anywhere without a repeater housing
A90-RH7239T1R Repeater, T1, line, Intelligent, Encapsulated ILR7239LWI5, can be placed anywhere without a repeater housing, preset with NORMAL/THRU options
7231SB Repeater, T1, Intelligent Office Repeater With 220 Mechanics. Remotely Programmable With Addressable Loopback Intended For Use With 220-Type Shelves.
9132LAI3 MD Dec 2010 - Replaced by 9132SB
9132SB Repeater, T1, Intelligent Office Repeater-High Density IHR With STS Mechanics. Remotely Programmable Office Repeaters With Addressable Loopback Intended For Use With STS-Type Shelves.
9186SB Repeater, T1, Intelligent Office Repeater for use in an AT&T DDM+ shelf
520-10SWI3 NIU, DS1, Combo Office Repeater, Line Repeater and NIU; non-PM DS1 Combination Office Repeater, Line Repeater and NIU by option
ILR7239LW Repeater, T1 Line, Intelligent, AT&T 239 Mech (Bidirectional repeater w/ bidirectional LB and Power capabilities, ALBO, Extended range)
D4 Channel Units and Digital Data
Model Number Item Description
5740I4 NIU, DDS, Line or Local Power, Signal Regeneration Opt., Loopback testing
4520I9 Channel Unit, D4, 2FXO, LS/GS, GS E&M
4555I2 Channel Unit, D4, 2FXS/DPO/TO/GT/PLAR Module
1 & 2 Circuit Mountings (200 Mechanics) and Accessories
Model Number Item Description
295I1 Mounting, 1 -Ckt 400-type. Network connections via screw terminal. Customer connections via screw terminal or modular jack. Equipped with a -48 VDC power supply with and 8ft. Cord
DTWA528-01L4-8-16 Mounting, 1 -Ckt 400-type. Network connections via screw terminal. Customer connections via screw terminal or modular jack. Equipped with a -48 VDC power supply with and 8ft. Cord
DTWA528-01QP Mounting, 1 -Ckt 400-type. Network connections via screw terminal. Customer connections via screw terminal or modular jack. Equipped with a -48 VDC power supply with and 8ft. Cord
A90-28MA32 Mounting, 1 -Ckt 200 or 400-type Facility-side connections are made to a 14-position terminal block (TB2). Customer connections can be made to either TB2 or to an 8-pin, keyed modular jack that can be custom-wired for the application.
B90-31MA92 MD - Replaced by A90-28MA32
D90-28MA200 MD Mar 2009 - Replaced by D90-28MA200K
D90-28MA200K Mounting, 2 -Ckt 200 or 1 -Ckt 400-type. Offers switchable RJ48C/RJ48S customer jacks, and security features to help prevent unauthorized access to the plug-in modules and the Facility wiring area. Facility connections via wire wrap pins. Key lock.
DTM02 Mounting, 2 -Ckt NCTE Wall, PHX screw term., 2 Circuit front access wall mounting. Facility side phoenix screw terminals, CPE side RJ48C/S, stackable
DTM02L4 Mounting, 2 -Ckt NCTE Wall, PHX screw term., 2 Circuit front access wall mounting. Facility side phoenix screw terminals, CPE side RJ48C/S, stackable, key lock
DTWA528-02I2 Mounting, 2 -Ckt NCTE Wall, Clamshell, 2 Circuit Universal Wall Mounting for T1, HDSL, DDS, Analog; customer RJ48C/S switchable jacks
DTWA528-02PKWI3 KIT, w/DTWA528-02I2 & B90-311610
DTWA528-02I2L4 Mounting, 2 -CKT NCTE Wall, Clamshell, 2 Circuit universal wall mounting for T1, HDSL, DDS, Analog; customer RJ48C/S switchable jacks with locking cover
DTWA528-02I2L6 MD - Replaced by DTWA528-02I2L4 & A90-204100
C90-28MA202 Mounting, 2 -Ckt 200 or 1 -Ckt 400-type. Offers switchable RJ48C/RJ48S customer jacks, and security features to help prevent unauthorized access to the plug-in modules and the Facility wiring area. Facility connections via screw terminals. Key lock
C90-28MA202K Mounting, 2 -Ckt 200 or 1 -Ckt 400-type. Offers switchable RJ48C/RJ48S customer jacks, and security features to help prevent unauthorized access to the plug-in modules and the Facility wiring area. Facility connections via screw terminals. Key lock with Key
C90-28MA202P Mounting, 2 -Ckt 200 or 1 -Ckt 400 type. Offers switchable RJ48C/RJ48S customer jacks, and security features to help prevent unauthorized access to the plug-in modules and the Facility wiring area. Facility connections via screw terminals.
4 & 6 Circuit Mountings (200 Mechanics) and Accessories
Model Number Item Description
B90-28MA204AK Mounting, 4 -Ckt Front Access Wall for DS-1 HDSL, DDS and Analog, Facility side wirewrap, switchable RJ48C/RJ48S CPE Interface, with locking cover
B90-28MA204BK Mounting, 4 -Ckt Front Access Wall for DS-1 HDSL, DDS and Analog, Facility side screw terminals, switchable RJ48C/RJ48S CPE Interface with locking cover
DSAWM-204PBI2 Mounting, 4 -Ckt Wall Preassembled Protection Kit w/4 -Ckt mounting assembly, Network and customer 5-Pin lightning Protection and Switchable RJ48C/S, Locking Cover
DSAWM-204PS Mounting, 4 -Ckt Wall Preassembled Protection Kit w/4--Ckt mounting assembly, Network and customer 5-Pin lightning Protection and Switchable RJ48C/S
DTM04 Mounting, 4 -Ckt NCTE Wall, PHX Screw Term, 4 -Ckt front access wall mounting, Facility side phoenix screw terminals, CPE side RJ48C/S, Stackable
DTWA528-04L4-8 Mounting, 4 -Ckt NCTE 19"/23" Rack or Wall, 4 -Ckt 19" or 23" Rack or Wall Mount for T1, HDSL; Facility side screw terminals; Customer side screw terminals, ground pin 27 only
DTWA528-04I2L4 Mounting, 4 -Ckt NCTE 19"/23" Rack or Wall, 4 -Ckt 19" or 23" Rack or Wall Mount for T1, HDSL; Facility side screw terminals; Customer side screw terminals & RJ48C/S jacks, locking cover
DTWA528-04I2L4-9 Mounting, 4 -Ckt NCTE 19"/23" Rack or Wall, 4 -Ckt 19" or 23" Rack or Wall Mount for T1, HDSL; Facility side wire wrap; Customer side RJ48C/S jacks, locking cover
DTWA528-04I2L6 MD May 2009 - Replaced by DTWA528-04I2L4 and A90-204100 power supply
DTMA528-06L14 Mounting, 6 -Ckt NCTE 19"/23" Rack or Wall, 6 -Ckt 19" or 23" Rack or Wall Mount for T1, HDSL; Facility side screw terminals; Customer side screw terminals & RJ48C jacks
DTWAK04L4  Mounting, 4 Position Mounting Kit, Network connection to prewired half 66 block, CPE side connection to RJ48C/S modular jacks,Non-locking cover. 
8 Circuit Mountings (200 Mechanics) and Accessories
Model Number Item Description
A90-28MA208A Mounting, 8 -Ckt universal 200/400 Mech, for DS1, HDSL, DDS and Analog Data. Wire wrap and 25 pair Amp wiring opt on the Network. RJ48C/S, RJ48H, and wire wrap on the CPE with key lock
A90-28MA208AP Mounting, 8 -Ckt universal 200/400 Mech with power and key lock (network-wire-wrap and 25 pr telco, cpe-wire wrap, RJ48H and RJ48C/S)
DTWA528-08L4-5 Mounting, 8 -Ckt, Wall Mounting with RJ48C/S/H UCIM and locking cover for T1, HDSL, DDS, Analog; Facility side amphenol; Customer side RJ48C/S/H switchable
12-14 Circuit Mountings (200 Mechanics) and Accessories
Model Number Item Description
DSAWM-121LB MD - No Replacement
DSAWM-214ALCI2 Mounting, 14 -Ckt 400 type. Network interface connections made by wire wrapping the appropriate leads from the facility to the proper pins located on the unit's adapter board. Customer Interface connections are made at RJ48C modular jacks.
DTWA528-14L4-5 Mounting, 14 Pos NCTE w/ RJ48C/S/H UCIM, 14 Position Universal Wall Mounting w/ RJ48C/S/H UCIM for T1, HDSL, DDS, Analog; facility side amphenol; customer side RJ48C/S/H switchable, Pin 27 Grnd, Locking cover
DTWA528-14L5-14 Mounting, 14 Pos NCTE w/ RJ48C/S/H UCIM, 14 Position Universal Wall Mounting w/ RJ48C/S/H UCIM for T1, HDSL, DDS, Analog; facility side amphenol; customer side RJ48C/S/H switchable
DTWA528-14L5-14PKW Mounting Kit, w/ DTWA528-14L5,14 + 25pr, Kit w/ DTWA528-14L5,14 Mounting + 25pr cable & 66 Block
22-28 Circuit Mountings (200 Mechanics) and Accessories
Model Number Item Description
A90-31MA222 Mounting, 22 -Ckt 200 or 11 -Ckt 400 mechanics 19" relay rack with 50 pin or wire wrap connections on network and 50 pin and RJ48C on customer
C90-31MA228 Mounting, 28 -Ckt, Rack Mount, Universal Application, 200 Mechanics. Options for Fuse and alarm, power, front or rear connection, door w/lock, AMP Facility Wiring. AMP Customer Wiring.
C90-31MAZ228 Mounting, 28 -Ckt, Rack Mount, Universal Application, 200 Mechanics. Opts for Fuse and alarm, power, front or rear connection, AMP Facility Wiring. AMP Customer Wiring.
DSA-2280AI2 Mounting 28 -Ckt for DS1 or HDSL, 200 Mech . Mounts In a 23 Inch Relay Rack, Has Movable Mounting Ears. Connections with 64-pin amphenols or wire wrap w/Locking front cover
DSA-2280I3 MD Jun 2011 - No replacement
DSAWM-2280ALCI3 Mounting, 28 -Ckt, Wall, For DS1, HDSL, w/locking cover, Network wirewrap and two 32 pair connectors, and wirewrap and front panel RJ48C
DTMA528-19I4L8 Mounting, 28 Pos 19/23" Rack Mount for T1, DS-1, HDSL, Pin 27chassis ground, Network 32 pair connector or wire wrap, Customer 32 pair connector, wire wrap, or RJ48C
DTMA528-19I4L4-14 Mounting, 28 Pos 19/23" Rack Mount for T1, DS-1, HDSL, with locking cover and L14 adds pins 2 and 11 to chassis ground, Network 32 pair connector, Customer 32 pair connector and RJ48C
DTMA528-23I4L3-10 Mounting, 28 Circuit 23" Rack Mount For DS1 and HDSL, Network 32 pair Connectors, Customer 32 pair connectors (L3 Removes RJ48C Jacks) L10 Adds Rear Cover Only
DTMA528-23I4L4-14 Mounting, 28 Pos 23" Rack Mount for T1, DS-1, HDSL, with locking cover and L14 adds pins 2 and 11 to chassis ground, Network 32 pair connector, Customer 32 pair connector and RJ48C
DTWA528-28L4-5-7 Mounting, 28 -Ckt NCTE Wall Mount, 28 circuit Wall Mounting Assembly w/ wire wrap pins and two 32-pair Amphenol for Facility connections, and switchable RJ48C/S/H CPE Interface. Includes two 32-pair Y cables and Key locking cover
DTWA528-28L14 Mounting, 28 Pos NCTE Wall Mount, 28 Position Wall Mounting Assembly w/ wire wrap pins and two 32-pair amphenol for Facility connections, and RJ48C and two 32-pair amphenol connectors for CPE connections
DTWA528-28I2L4 Mounting, 28 -Ckt NCTE Wall Mount, 28 circuit Wall Mounting Assembly w/ wire wrap pins and two 32-pair Amphenol for Facility connections, and RJ48C and two 32-pair Amphenol connectors (RJ48H) for CPE connections and Key locking cover
Analog Voice Units and Mountings
Model Number Item Description
USA23-120I2 Mounting, 12 Circuit & 2 slots for Pwr. And ring gen.,200 or 400 Mechanics, Rack Mount 23”, Prewired.
USAWM-061A Mounting, 6 Circuit, Wall, for NCTE DST (additional dedicated slots available for pwr and ring gen.), amphenol connectors, w/key lock
USAWM-061I2 Mounting, 6 Circuit, Wall, for NCTE DST (additional dedicated slots available for pwr and ring gen.), amphenol connectors
Ancillary
Model Number Item Description
A99-31QC20 QuickCheck 2--Ckt DS1 Kit. Includes DSAWM-202QC 2--Ckt mounting, 3 cables, 2 carry bags. (allows HDSL testing at the MDF)
A99-31QC22 QuickCheck 2--Ckt DS1 Kit. Includes DSAWM-202QC 2--Ckt mounting, 3 cables, 2 carry bags. (allows HDSL testing at the MDF)with 239 ext. and Banjo.
C99-28MK2QBK Mounting Kit w/ Wall Mount Bracket, 4--Ckt Mounting (28MA204AK) and Network side Prewired to 66 BLK w/ Lock
001-000219 Allen Wrench 7/32" Special (pin-in-hex)
001-000228 Tool, Enclosure Opening, Pin-in-hex, 5/16 inch
026-100025  Key 1/4 Turn Lock 
029-000001  Packet Clear Plastic 
030-000981  Circuit ID Card, 4 Position, Orange 
030-000002  Position Card 400 Shelf 
060-000138 Test Card, 239 Repeater (CTC-239B) 
060-000139 RJ45 Breakout Module 
801-000216 Cut-Thru Card, Slim/400 type w/ front panel DS1 Jacks for test access
801-000263  RJ48C to RJ48X Adapter
080-500455 Adapter Kit for attaching 19" and 23" shelves
080-500461 Adapter Bracket for DSAWM-2280xxx products to extend the mounting ears
1800I1 Wall Mount for MPS255X
A90-31FC02 Fuse Card for C90-31MA228 200 mechanics type shelf
A90-31FD00 31FD00 MTS Shelf Front Door
A90-31MK26  MD - No replacement
A90-CPCNCT The A90-CPCNCT is a rectangular-box-shaped enclosure that serves as a cable feeding and management system for two or more Cell-Pak CP528 enclosures, which are typically mounted with and immediately above the system (in direct contact). 
A90-CPMK500 CellPak Pole Mount Kit 
A90-CPMK502 The CPMK502 Dual-CellPak Mounting Bracket facilitates a quick and easy back-to-back installation of two Westell CellPak CP524/CP550 enclosures onto a sturdy wall or post. 
A90-CPMK505 CellPak Adapter Mounting Bracket Kit 
A99-0504CA  MD - No replacement
DTMWB4  Term Mounting Bracket 4-Slot Digital 
DTMWB7  Term Mounting Bracket 7-Slot Digital 
MBA1923-2  Rack Mounting Bars for Wall Mountings 
Cables
Model Number Item Description
023-700200 Cable, 2M, SM Fiber STB w/4 SCU?UPC Fanout
023-800049 Modular Cord 7FT RJ45-RJ45
023-800055 Cable Assembly 3 Cond w/ #5/6 Lugs
023-800059 Modular Cord 8P/8C 310 Plug 6 FT
023-800144 RJ48 to Y 463 TX, 463RX 16' LG.
023-800184 Cable Assembly SGL Pair TW/2X6P2C RJ11 Plug 14 FT
023-800206 Cable, 463 FM to ALGTR GRN/YEL
023-800207 Cable, 463 FM to ALGTR BLK/RED
023-800266 Cable, 10 Foot, 8 Conductor Shield, RJ48 to Stub
023-800267 Cable, 20 Foot, 8 Conductor Shield, RJ48 to Stub
023-800268 Cable, 30 Foot, 8 Conductor Shield, RJ48 to Stub
023-800269 Cable, 50 Foot, 8 Conductor Shield, RJ48 to Stub
023-800270 Cable, 60 Inch, #6 AWG w/#10 Two Hole Lug
023-800311 Cable Assembly 32 Pair F 24GA/15 FT Stub
023-800313 Cable Assembly Lug to Lug 3 Cond 8'
023-800315 Cable Assembly 32 Pair 24GA Female/Female 3 FT
023-800399 Cable Assembly, Dig to Analog 206/207
023-800400 Cable Assembly, Dig to Analog 214/215
023-800443 Cable Assembly, 14 inch, Mod/Spade Lug
023-800580 Cable Assembly, 6 inch, RJ48, Male to Female w/XFM
023-800583 Cable Assembly, 6 inch, RJ11, Male to Female w/XFM
023-800585 Cable Assembly, 6 inch, COAX, Male to Male w/XFM
023-800595 Cable Assembly, 10 Feet, 4X RJ48 to RJ48 Plug
023-800596 Cable Assembly, 20 Feet, 4X RJ48 to RJ48 Plug
023-800597 Cable Assembly, 30 Feet, 4X RJ48 to RJ48 Plug
023-800598  Cable Assembly, 50 Feet, 4X RJ48 to RJ48 Plug 
023-800605  Cable Assembly, 5 FEET, 32 PAIR, MALE-T TO FEMALE FLM 
023-800620  Cable Assembly, 20 FEET, 32 PAIR, MALE-T TO FEMALE FLM 
023-800630  Cable Assembly, 30 FEET, 32 PAIR, MALE-T TO FEMALE FLM 
023-800660  Cable Assembly, 60 FEET, 32 PAIR, MALE-T TO FEMALE FLM 
023-800699  Cable Assembly, 100 FEET, 32 PAIR, MALE-T TO FEMALE FLM 
023-800700  Cable Assembly, 5 FEET, 32 PAIR, MALE-T FLM TO FEMALE 1161A 
023-800710  Cable Assembly, 5 FEET, 32 PAIR, FEMALE TO FEMALE 1161A 
023-800810  Cable Assembly, 10 FEET, 32 PAIR, MALE-T TO MALE-90 FLM 
023-800860  Cable Assembly, 60 FEET, 32 PAIR, MALE-T TO MALE-90 FLM 
720-010008  Cable Assembly, 10 FEET, CAT5 RJ45 TO BLUNT 
720-010036  Cable Assembly,  32 Pair Male to Blunt 10 FT 
720-010214  Cable Assembly, 10 FEET, 25 PAIR MALE TO BLUNT 
720-015036  Cable Assembly, 15 FEET, 32 PAIR MALE TO BLUNT 
720-020214  Cable Assembly, 20 FEET, 25 PAIR MALE TO BLUNT 
720-030036  Cable Assembly, 30 FEET, 32 PAIR, MALE TO BLUNT 
720-060036  Cable Assembly, 60 FEET, 32 PAIR, MALE TO BLUNT 
721-030214  Cable Assembly, 30 FEET, 25 PAIR, FEMALE TO BLUNT 
721-060214  Cable Assembly, 60 FEET, 25 PAIR, FEMALE TO BLUNT 
722-002140  Cable Assembly, 3 FEET, 32PAIR, Y-ADAPT, FEMALE TO (2 25 PAIR MALE) 
722-005214  Cable Assembly, 5 FEET, 25 PAIR, FEMALE TO BLUNT 
722-010036  Cable Assembly 32 Pair FeMale to Blunt 10 FT 
722-010036R  Cable Assembly, 10 FEET, 32 PAIR, FEMALE TO BLUNT ROHS 
722-010214  Cable Assembly, 10 FEET, 25 PAIR, FEMALE TO BLUNT 
722-010216  Cable Assembly, 10 FEET 16 PAIR, FEMALE TO BLUNT 
722-015036  Cable Assembly, 15 FEET, 32 PAIR FEMALEMALE TO BLUNT 
722-020036  Cable Assembly, 32 Pair FeMale to Blunt 20 FT 
722-020214  Cable Assembly, 20 FEET, 25 PAIR, FEMALE TO BLUNT 
722-025036  Cable Assembly, 25 FEET, 25 PAIR, FEMALE TO BLUNT 
722-030036  Cable Assembly 32 Pair FeMale to Blunt 30 FT 
722-030214  Cable Assembly 25 Pair FeMale to Blunt 30 FT 
722-030229  Cable Assembly, 30 FEET, 25 PAIR, FEMALE TO BLUNT AFC 
722-050036  Cable Assembly, 50 FEET, 32 PAIR, FEMALE TO BLUNT 
722-060036  Cable Assembly 32 Pair FeMale to Blunt 60 FT 
722-060214  Cable Assembly 25 Pair FeMale to Blunt 60 FT 
722-100036  Cable Assembly 25 Pair FeMale to Male 100 FT 
722-100214  Cable Assembly, 100 FEET, 25 PAIR, FEMALE TO BLUNT 
722-200036  Cable Assembly 25 Pair FeMale to Blunt 60 FT 
722-200214  Cable Assembly, 200 FEET, 25 PAIR, FEMALE TO BLUNT 
723-005036  Cable Assembly, 5 FEET, 32 PAIR, FEMALE-T TO FEMALE-RT ANG 
723-010036  Cable Assembly, 10 FEET, 32 PAIR, FEMALE-T TO FEMALE-RT ANG 
723-015036  Cable Assembly, 15 FEET, 32 PAIR, FEMALE-T TO FEMALE-RT ANG 
723-020036  Cable Assembly, 20 FEET, 32 PAIR, FEMALE-T TO FEMALE-RT ANG 
723-030036  Cable Assembly, 30 FEET, 32 PAIR, FEMALE-T TO FEMALE-RT ANG 
724-003036  Cable Assembly 32 Pair FeMale to FeMale 3 FT 
724-005036  Cable Assembly 32 Pair FeMale to FeMale 5 FT
724-010036  Cable Assembly, 10 FEET, 32 PAIR, FEMALE TO FEMALE 
724-015036  Cable Assembly, 15 FEET, 32 PAIR, FEMALE TO FEMALE 
724-020036  Cable Assembly, 20 FEET, 32 PAIR, FEMALE TO FEMALE 
724-025036  Cable Assembly, 25 FEET, 32 PAIR, FEMALE TO FEMALE 
724-030036  Cable Assembly, 30 FEET, 32 PAIR, FEMALE TO FEMALE 
724-050036  Cable Assembly, 50 FEET, 32 PAIR, FEMALE TO FEMALE 
724-060036  Cable Assembly, 60 FEET, 32 PAIR, FEMALE TO FEMALE 
724-120036  Cable Assembly, 120 FEET, 32 PAIR, FEMALE TO FEMALE 
724-200036  Cable Assembly, 200 FEET, 32 PAIR, FEMALE TO FEMALE 
725-030036  Cable Assembly, 30 FEET, 32 PAIR, STRGHT MALE TO BLUNT 
726-005008  Cable Assembly, 5 FEET, CAT5, RJ45 PLUG TO RJ45 PLUG 
726-005036  Cable Assembly, 5 FEET, 32 PAIR, MALE TO MALE 
728-005150  Cable Assembly, 5 FEET, 32 PAIR, MALE TO FEMALE FLM MUX 
728-005214 Cable Assembly, 5 FEET, 25 PAIR, MALE TO FEMALE
728-010036 Cable Assembly 32 Pair Male to FeMale 3 FT
728-010150 Cable Assembly, 10 FEET, 32 PAIR, MALE TO FEMALE FLM MUX
728-010214 Cable Assembly, 10 FEET, 25 PAIR, MALE TO FEMALE
728-020150 Cable Assembly, 20 FEET, 32 PAIR, MALE TO FEMALE FLM MUX
728-020214 Cable Assembly, 20 FEET, 25 PAIR,MALE TO FEMALE
728-030150 Cable Assembly, 30 FEET, 32 PAIR, MALE TO FEMALE FLM MUX
728-030214 Cable Assembly, 30 FEET, 25 PAIR, MALE TO FEMALE
728-060150 Cable Assembly, 60 FEET, 32 PAIR, MALE TO FEMALE FLM MUX
728-060214 Cable Assembly, 60 FEET, 25 PAIR, MALE TO FEMALE
728-100214 Cable Assembly, 100 FEET, 25 PAIR, MALE TO FEMALE
728-200214 Cable Assembly, 200 FEET, 25 PAIR, MALE TO FEMALE
729-010150 Cable Assembly, 10 FEET, 32 PAIR, MALE TO FEMALE R/A
A90-9705010 Cable Assembly 12 Pair Female To Stub 10 FT
A90-9726050  Cable Assembly 32 Pair Female to Stub 50 FT
A90-9727002 Cable Assembly 32 Pair Female to Female 2.5 FT 
A90-9727010  Cable Assembly 32 Pair Female to Female 10 FT
A90-9727015 Cable Assembly 32 Pair Female to Female 15 FT
A90-9727020 Cable Assembly 32 Pair Female to Female 20 FT
A90-9727025 Cable Assembly 32 Pair Female to Female 25 FT
A90-9727100 Cable Assembly 32 Pair Female to Female 100 FT
A90-9728005 Cable Assembly 32 Pair Male to Female 5 FT
A90-9728010 Cable Assembly 32 Pair Male to Female 10 FT
A90-9728025 Cable Assembly 32 Pair Male to Female 25 FT
A90-9728050 Cable Assembly 32 Pair Male to Female 50 FT
A90-9728100  Cable Assembly 32 Pair Male to Female 100 FT
Fiber Systems, CP550 and QuadJack
Model Number Item Description
A90-FS1X2M3 Fiber Optic Signal Splitter cable, 50/50 ratio, Loss: ˜3.5 dB without connectors, Operating Temperature: -40 to +85°C, Back Reflection: ≤ -55dB, Port configuration: 1x2, Uniformity: <=.80dB, Single Mode Fiber SC-UPC to SC-APC, Length 3 meters. These cables were designed for 50/50 optic signal splitting with connection from a GPON (SC/UPC) device to 2 (SC/APC) Optical interfaces.
A90-FS1X2M5 Fiber Optic Signal Splitter cable, 50/50 ratio, Loss: ˜3.5 dB without connectors, Operating Temperature: -40 to +85°C, Back Reflection: ≤ -55dB, Port configuration: 1x2, Uniformity: <=.80dB, Single Mode Fiber SC-UPC to SC-APC, Length 5 meters. These cables were designed for 50/50 optic signal splitting with connection from a GPON (SC/UPC) device to 2 (SC/APC) Optical interfaces.
A90-FS1X2LG2 Optical Splitter Module, LGX Type, Dual 1X2 Port, 50/50 Coupling Ratio, Loss: ˜3.5 dB without connectors, Operating 50Temperature: -40 to +85°C, Back Reflection: ≤ -55dB, Port configuration: 1x2, Uniformity: <=.80dB, Form factor: LGX-118, Single Mode Fiber SC-UPC to SC-UPC. This Module was designed to provide Dual 1X2 optical signal splitters with SC/UPC connectors. The recommended mountings for this module are the Westell VEUP-30 Panel or the VEUE-30 Enclosure or any LGX-118 Type Mounting.
A90-CP550HINT Mounting, Fiber Transport System, DS1, For High Voltage Protection, Intermediate Unit (Interfaces 4 HDSL or T1 Circuits with DS1 Fiber.
CP550RMT Mounting, Fiber Transport system, DS!, For High Voltage Protection, Remote Unit (Interfaces DS1 fiber to Copper at the Customer.
FNI5765 Card, Fiber Network Interface, Used with CP550RMT, converts DS1 optical to elec., also functions as PMNIU.
HFR6755 Card, HDSL Fiber Repeater, Converts DS1 electrical to Fiber Optic, line powered by HDSL voltage.
TFR5755 Card, T1 Fiber Repeater, Converts DS1 electrical to Fiber Optic, Line powered by T1 current.
A90-350012 Card, QuadJack Fiber Alarm Card for up to 2 3500XX T1 Fiber Modules, Mounts in the AUX slot of A90-35MA04, local and remote major and minor alarm indication, Requires -42 to -56Vdc.
A90-350016 MD Oct 2011 - No replacement
A90-35MA02  Mounting, desk or wall, Remote end, 400-type designed to house one Westell 3500-XX series T1 Fiber QuadJack module. Wiring connections are made to the four RJ48C jacks provided The fiber cables route through a notch located on the side of the assembly and connect to the 3500-XX printed circuit board. 
A90-35MA02P  Mounting, desk or wall, Remote end, 400-type designed to house one Westell 3500-XX series T1 Fiber QuadJack module. Wiring connections are made to the four RJ48C jacks provided The fiber cables route through a notch located on the side of the assembly and connect to the 3500-XX printed circuit board w/6060-04 power supply 
A90-35MA04P  Mounting, desk, wall or shelf (mounting brackets not included) 400-type designed to house 2 Westell 3500-XX Fiber modules and an optional Westell Alarm module. Connections can be made to wire-wrap connectors, to the four RJ48C modular jacks and to wire wrap for alarm connections w/6060-04 power supply 
B90-350422SC  Multiplexor, "QuadJack", Fiber Multiplexor and Transceiver, 4 DS1 signals W/range of 27miles on single mode pr. 
Jack Panels & Connection Blocks
Model Number Item Description
A90-31FA28C MD Oct 2011 - Replaced by RJ28C-28I2
A90-31RA28W Panel, Rear-access panel converts two of the basic shelf assembly's 32-pair Telco connectors to 28 RJ48C jacks. Intended for use on CPE I/O side of shelf. Plugs directly into connectors P3 and P4 on the back of the 31MA228 shelf
A90-31RP10C5-19 Panel, Protection, TYCO C5C Type, 1 RU, 10 Circuit, 19" Rack Mount, stubbed cables
A90-31RP30C5-19A Panel, Protection, TYCO C5C Type, 1 RU, 30 Circuit, 19" Rack Mount, stubbed cables
A90-31RP30C5-A Panel, Protection, TYCO C5C Type, 1 RU, 30 Circuit, 19" or 23" Rack Mount, Amp. Terminated  Cables for Fujitsu Mux.
A90-28PK04B Protection Kit provides lightning protection for up to four Network or Customer circuits when installed and connected to either side of a mounting assembly Network side is screw terminals and the customer is RJ48C/S. 5 pin lightning modules are required and sold separately.
A90-28PK04C Protection Kit provides lightning protection for up to four Network or Customer 4 circuits when installed and connected to either side of a mounting assembly Network side is RJ48C jacks and the customer is RJ48C/S. 5 pin lightning modules are required and sold separately.
A90-28PK04N Protection Kit provides lightning protection for up to four Network or Customer circuits when installed and connected to either side of a mounting assembly Network side is screw terminals and the customer is screw terminals. 5 pin lightning modules are required and sold separately.
HCB5S-4X4 Connecting Block, 4 -Ckt RJ48C/S or Screw Term. To RJ48C/S or Screw Term. w/ 5-pin Protection both sides.
HCBQC8RJ Connecting Block, 8 -Ckt, IDC to RJ48C/S
JMA28 Panel, 28 -Ckt Jack Panel RJ48C
RJ48C-28BAI2 Panel, 28--Ckt Jack Interface panel RJ48C, 19” or 23” Rack/Wall mount w/ears
RJ48C-28I2 Panel, 28--Ckt Jack Interface panel RJ48C, 19” or 23” Rack/Wall mount w/ears and two 3-foot, 64-pin, female, Amphenol cables.
B90-964902 Adapter Bracket used to a replace 66-type punch-down block and up to 12 separate RJ48C interface jacks. Will accept a 25-pair cable with an RJ48H connector from the network and provide RJ48C. Contains an RJ48H to 12 modular jacks along with wire-wrap pins for an optional interface point.
UCIM08C Interface Module, 8-Pos RJ48C/S/H for DTWA528-8; Universal Customer Interface Module provides customer side switch options for RJ48C, RJ48S & RJ48H
UCIM14C Interface Module, 14-Pos RJ48C/S/H for DTWA528-14; Universal Customer Interface Module provides customer side switch options for RJ48C, RJ48S & RJ48H
UCIM28C Interface Module, 8-Pos RJ48C/S/H for DTWA528-8; Universal Customer Interface Module provides customer side switch options for RJ48C, RJ48S & RJ48H
VirtualEdge Enclosure and Panels
Model Number Item Description
A90-VE118BNC2P QuickCheck 2--Ckt DS1 Kit. Includes DSAWM-202QC 2--Ckt mounting, 3 cables, 2 carry bags. (allows HDSL testing at the MDF)
A90-VE118BNC6 Module, LGX 118 type, 6 Port, BNC couplers
A90-VE118SCA6 Module, LGX 118 type, 6 Port, SC-APC couplers
A90-VE118SCA8 Module, LGX 118 type, 8 Port, SC-APC couplers
A90-VE118SCU6 Module, LGX 118 type, 6 Port, SC-UPC Couplers
A90-VE118SCU8 Module, LGX 118 type, 8 Port, SC-UPC couplers
A90-VE152BNC6P Module, LGX 152 type, Surge Protection, BNC couplers
A90-VE2848CK6 Panel, VirtualEdge, Modular Keystone Panel, 28 position, 1 RU, DS1, w/6 RJ48C Keystone connectors.
A90-VE3600 Panel, VirtualEdge, Modular Keystone Panel, 36 Position w/blanks
A90-VE848CP Panel, VirtualEdge 8 DS1, rack mounting 5 pin protection
A90-VECMCVR Tray Cover, VirtualEdge Cable Management
A90-VECPL5E10 CAT5E Coupler - 10 Per Package (for use with connectivity panels VE1200, VE1212, VE2400 and VE2424
A90-VECPL5ED10 CAT5E Coupler - IDC on Network side - 10 Per Package (for use with connectivity panels VE1200, VE1212, VE2400 and VE2424
A90-VECPLBNC10 BNC Coupler - 10 Per Package (for use with connectivity panels VE1200, VE1212, VE2400 and VE2424
A90-VECPLLC1 LC To LC Coupler - 1 Per Package (for use with connectivity panels VE1200, VE1212, VE2400 and VE2424
A90-VECPLSC1 SC To SC Coupler - 1 Per Package (for use with connectivity panels VE1200, VE1212, VE2400 and VE2424
A90-VECMRING3 D-Ring Cable Management 3" - 1 Per Package (front projection, provides cable routing and support for connectivity panels VE1200, VE1212, VE2400 and VE2424
A90-VECMTRAY Cable Management Tray; front projection, provides cable tie-down and support for connectivity panels VE1200, VE1212, VE2400 and VE2424
A90-VEMK26 VirtualEdge Wall Plate for 2 VE Enclosures (A90-VEWM00N, A90-VEWM60, and A90-VEWM90)
A90-VEUPBNC6P DS3 Protection Panel Assembly E/W (1) A90-VEUP30 panel, (3) A90-VE118BNC2P Modules and (2) 3" D-rings
A90-VE118K4 Panel, VirtualEdge, Modular LGX Type Keystone Adapter Panel, 4 Empty Positions,
A90-VEUP30 Mounting, Panel, 3 position LGX 118 Type, wall or rack mount, w/rear tray
A90-VEWM00N MD Dec 2011 - No replacement
A90-VEWM20 2 Position Locking Enclosure w/ Sep Customer / Network Doors 3"x3"x8"
A90-VEWM60 6 Position Locking Enclosure w/ Sep Customer / Network Doors
A90-VEWM90 9 Position Locking Enclosure w/ Sep Customer / Network Doors
A99-VE2424BNC Panel, VirtualEdge, Modular Kestone Panel, 24 Position kit W/BNC connectors, Cable Tray and 2 D-rings, Grnd Lug, Cable ties, rack mount hardware.
A99-VE2424SC Panel, VirtualEdge, Modular Kestone Panel, 24 Position kit W/SC connectors, Cable Tray and 2 D-rings, Grnd Lug, Cable ties, rack mount hardware.
A90-VEUE-30 Mounting, Wall, 3 position LGX 118 Type, wall mount, w/12 empty keystone ports, separate Network and customer doors, fiber spool and locking cover.
A90-VE1200 The A90-VE1200 connectivity panel is a 12-position interface panel that is used to terminate any 10Base-T, 100Base-T, fiber, or COAX services (or a combination thereof, or any other services) typically at the CPE point of demarcation. The coupler type selected to occupy any one or all of the 12 positions determine the service terminated. Couplers purchased separately.
A90-VE1212 The A90-VE1212 connectivity panel is a 12-position interface panel that is used to terminate any 10Base-T, 100Base-T, fiber, or COAX services (or a combination thereof, or any other services) typically at the CPE point of demarcation. The coupler type selected to occupy any one or all of the 12 positions determine the service terminated. Couplers provided are Cat5e.
A90-VE2400 The A90-VE2400 connectivity panel is a 24-position interface panel that is used to terminate any 10Base-T, 100Base-T, fiber, or COAX services (or a combination thereof, or any other services) typically at the CPE point of demarcation. The coupler type selected to occupy any one or all of the 24 positions determine the service terminated. Couplers purchased separately 
A90-VE2424 The A90-VE2424 connectivity panel is a 24-position interface panel that is used to terminate any 10Base-T, 100Base-T, fiber, or COAX services (or a combination thereof, or any other services) typically at the CPE point of demarcation. The coupler type selected to occupy any one or all of the 24 positions determine the service terminated. Couplers provided are Cat5e.
SwingRacks for Wall Mounting Routers, Switches and MUXes
Model Number Item Description
A90-VESR00 Wall-mount, swing-down rack that securely mounts switches, routers and muxes, or any device that fits in a standard 19" or 23" rack; space for up to 2 RUs (3.5 inches) in height and up to 18 inches deep; Earthquake Zone 4 and UL Certified; extends only 6 inches from wall when closed.
A90-VESR14 Wall-mount, swing-down rack that securely mounts switches, routers and muxes, or any device that fits in a standard 19" or 23" rack; space for up to 2 RUs (3.5 inches) in height and up to 18 inches deep; includes locking front/top cover and fiber management system; Earthquake Zone 4 and UL Certified; extends only 6 inches from wall when closed.
A90-VESR24 Wall-mount, swing-down rack that securely mounts switches, routers and muxes, or any device that fits in a standard 19" or 23" rack; space for up to 2 RUs (3.5 inches) in height and up to 18 inches deep; includes locking front/top/bottom cover and fiber management system; Earthquake Zone 4 and UL Certified; extends only 6 inches from wall when closed.
Enclosures, Heat Dissipation, Boxer™
Model Number Item Description
Westell Boxer™ Westell Boxer™ is an Actively Cooled, Weather Tight, Lightweight, Outdoor Cabinet with 10RU 19" Rack space and up to 600W of equipment heat dissapation.
A90-BXM1019-CAF Cabinet, Boxer 600W -48VDC fan cooling, 10RU 19" Rack. Separate Customer door, AC & GFI Outlet
A90-BXM1019-CAF2 Cabinet, Boxer 600W +24VDC fan cooling, 10RU 19" Rack. Separate Customer door, AC & GFI Outlet
A90-BXM1019-NAF Cabinet, Boxer 600W -48VDC fan cooling, 10RU 19" Rack. AC & GFI Outlet
A90-BXM1019-NHE Cabinet, Boxer 400W -48VDC heat exchanger cooling, 10RU 19" Rack. AC & GFI Outlet
A90-BXM1019-NHE2 Cabinet, Boxer 400W +24VDC heat exchanger cooling, 10RU 19" Rack. AC & GFI Outlet
A90-BXM1019-NMT Cabinet, Boxer, no active cooling, 10 RU, 19" rack, AC&GFI outlets, Screw-down rear panel
A90-BXM2019-4HE Cabinet, Boxer, 400 W Heat Exchanger, 20 RU, 19" rack, -48Vdc
A90-BXB19-A Boxer 19 Battery Box less Heater Pad
A90-BXB19-B Boxer 19 Battery Box with Heater Pad
A90-BXB19-C Boxer 19 Battery Box less Heater Pad and with Knockouts
A90-BXS19-14 Boxer 19 14" Skirt
A90-BXA-HP01 Boxer Battery Heater pad
A90-BXA19-PT1 Boxer 19" Pad Mount Template
A90-BXA-PM02 Boxer Main Pole Mount Kit
A90-BXA-PM03 Boxer Main+Batt Box Pole Mount Kit
A90-BXA-PM04 Boxer Pole Mounting Kit for 20 RU W/Battery Box
A90-BXA-WH01 Boxer Main + Battery Box Wall H-Frame Mount Kit
A90-BXA-CK01 Coupling Kit (2) 1/2", (2) 3/4", (4) 2"
Wall-Mount Outdoor Enclosures
Model Number Item Description
A90-31EE202D Enclosure, 2-slot outdoor Has a Telco/Facility compartment, and a Customer connector area. Both sides have gas-tube lightning protectors. The outer enclosure provides protection against tampering, and is designed for vertical mounting on a wall, at the customer's building near the cable drop.
A90-CPCNCT Kit, Wiring Conduit for Cell Pack Xconnect. Used to provide weatherproof conduit to connect Two CP528 enclosures
A99-CPMD28X Kit, Field Expansion, Upgrades the CP528MMD from 28 DS1 to 56 DS1 circuits and from 3 DS3 to 6 DS3 circuits.
A90-CPMK500 Kit, Mounting Bracket, for mounting CellPack to a round pole
A90-CPMK502 Kit, Mounting Bracket, for mounting 2 CellPack enclosures back-to-back on a wall or post.
A90-CPMK505 CellPak Adapter Mounting Bracket Kit
A99-0504CA CP504BST Retrofit Cable Kit
B90-31EE202BA Enclosure, 2-slot outdoor Has a Telco/Facility compartment, and a Customer connector area. Facility side have Gas Tube,Gell Filled lightning protectors. The outer enclosure provides protection against tampering, and is designed for vertical mounting on a wall, at the customer's building near the cable drop.
B90-31EE202BS Enclosure, 2-slot outdoor Has a Telco/Facility compartment, and a Customer connector area. Both sides have 5-pin lightning protectors. The outer enclosure provides protection against tampering, and is designed for vertical mounting on a wall, at the customer's building near the cable drop. BellSouth
A99-SCC2418ES-1 Enclosure, Westell SmartCom Cabinet, 5 Port Ethernet Managed Switch W/PoE Port, provides uninterruptable 24Vdc to power Ethernet Connectivity and External Radios, Site Monitoring, Wire Mesh Backplane for mounting Radio Equipment, Automatic Battery backup, rectifier and charger.
A99-SCC2418XP-2 Enclosure, Westell SmartCom Cabinet,  provides uninterruptable 24Vdc to power Customer Provided Internal Radio, Rectifier/Charger, Wire Mesh Backplane for mounting Radio Equipment, Automatic Battery backup,
CP504I2 Enclosure, Outdoor, Pole or Wall Mount, 4 Slot T1, DS1, HDSL and Analog w/Network side and Customer side 5-Pin Protection sockets
CP528 Enclosure, Outdoor, Pole or Wall Mount, 8 Slot T1, DS1, HDSL and 2 POTS lines w/Network side and Customer side 5-Pin Protection sockets, network connections Wire wrap, Customer connections RJ48C/S or screw term. w/RJ11 or screw term for voice/analog.
CP528MMD Enclosure, Outdoor, Pole or Wall Mount, "Meet Me Demarc", Standard unit provides a Protected Customer Interface for 28 DS1 circuits, optional Field Upgrade to 56 DS1 and 6 DS3 circuits W/A99-CPMD28X Expansion Kit W/TYCO C5C Protectors
CP528MT  Enclosure, Empty, , Stainless steel mounting mesh, Universal Dimensions are 14.35HX20.38WX8.90D Pole or Wall Mount 
CP528CSE  Enclosure, Outdoor Pole or wall mount, for mounting passive and non-electronic components; 26H, 18W, 9D; may be used to extend the CP528 series enclosures 
CP528CST  Enclosure, Outdoor, Pole or Wall Mount, Cell Site Terminal W/100 Pair TYCO C5C Protection Blocks for Both the Network side and the Customer side 
CP528CSTF  Enclosure, Outdoor, Pole or Wall Mount, Cell Site Terminal W/100 Pair TYCO C5C Protection Blocks for Both the Network side and the Customer side and 48Vdc Power Distribution using one additional 10Pair C5C Magazine to power up to 7 remote CellPaks. 
CP528CSES  Enclosure, Environmental, CELLPAK, Single Door, 21"H x 16"W, Stainless steel mesh 
CP538DS3P  Enclosure, Prewired for 3 DS3’s and 8 DS1’s, Backhaul application, Pole, Post or Wall mount, Lightning protection for network, customer and power, convection cooled, GFI outlet, Network Conn. BNC for DS3 and wire wrap for DS1, Customer Conn. BNC for DS3 and RJ48C or screw terminals for DS1. 
DP2002  Enclosure, NID, 2-Pos Outdoor for 200/400 type cards; environmental plastic enclosure for NIU, HDSL, DDS, ISDN or other service modules. Gas-tube fac. side, separate wiring areas 
Power Supplies and Ring Generators
Model Number Item Description
A90-204100 Power Supply -48 VDC/1.25 Amp. Has a six-foot power cord. This modified cord terminates with an adapter-type plug that contains both a male 3-prong plug and a female 3-prong receptacle (which accepts another male-ended plug, specially designed for applications when outlets are limited).
C90-606003 Power Supply 400-type -48Vdc at 2.0A when plugged into a standard 115Vac, 60Hz wall outlet. Features a front panel LED that indicates the presence of 48V at the output. The unit is internally protected against short circuit and over voltage conditions.
1800I1 Wall Mount for MPS255X, MPS25XX and 2560I1 Power Supplies.
2555I1 Power Supply that converts 117 VAC input to a 48 VDC (2 Amp) output 2 power cords: 1 cord is a 1-foot, female-ended cord used to connect a second 2555I1, and the 2nd is an 8-foot male ended power cord used for plugging into a standard 117 VAC
2555I2 Power Supply that converts 117 VAC input to a 48 VDC (2 Amp) output. It has 1 power cord: It is an 8-foot male ended power cord used for plugging into a standard 117 VAC
2556I1 Ring Generator, Modular, 400 type, 20/30HZ 10VA
2560I1 Power Supply, Modular, 115VAC/48VDC/2.5A
A90-31MK26 Mount Bracket, Wall for 6060-04 Power Supply
A90-606016 Power Supply 28Vdc at 2.0A when plugged into a standard 117VAC, 60Hz wall outlet. The 6060-16 features a front-panel LED that indicates the presence of 28V at the output (edge connector pins 17, 27, 35) and an 8-foot AC power cord. The unit is internally protected against short-circuit and over-voltage conditions.
A90-606018 Power Supply 300-type 48Vdc at 2.0A when plugged into a standard 117Vac, 60Hz outlet. Supply has a front-panel LED that indicates the presence of 48V at the output (edge connector pins 17, 27, 35). Unit is internally protected against short-circuit conditions and over-voltage conditions. Designed for mounting in a Westell 31MA228
B90-434800 Power Supply 48 VDC 250 mA output. The unit is internally protected against output short circuit and over voltage conditions. The 3ft cord terminates with a male 3-prong plug (for use in a standard AC receptacle). DC output connections are made to 3 screw terminals located on the back of the power supply.
B90-606004 Power Supply -48 Vdc at 2.0 Amps when plugged into a standard 115 Vac, 60 Hz wall outlet. A front panel LED shows the presence of -48 V at the output. The unit is internally protected against short circuit and over voltage conditions.
MPSPK-560 Power Supply Mounting with 6060-05 and1800
Remote Monitoring and Test
Model Number Item Description
A99-31QC20 QuickCheck 2--Ckt DS1 Kit. Includes DSAWM-202QC 2--Ckt mounting, 3 cables, 2 carry bags. (allows HDSL testing at the MDF)
STATEDGE-T1 Unit, DS1, Stand-alone, TI Status Indicator Unit
N04005-SVU SiteVu, Remote Monitoring, Battery Rundown Test, 8 Analog inputs, 32 Digital inputs, 4 pass-thru ports, RS232 craft interface, Ethernet connectivity, Temperature Hardened, 20 to 60Vdc power.
N04005-SVU/L0806  SiteVu Mini, Remote Monitoring, Battery Rundown Test, 6 Analog inputs, 4 Digital inputs, Internal Temp. Probe, USB craft interface, Ethernet connectivity, Temperature Hardened, 20 to 60Vdc power. 
N08004-BVU  BattVu, Remote Monitoring, Battery Rundown Test, 3 Analog inputs, 4 Digital inputs, Internal Temp. Probe, USB craft interface, USB Plug-n-Go, Temperature Hardened, 20 to 60Vdc power. 
Fuse and Alarm Panels
Model Number Item Description
General (All GMT, TPA and KLM Fuse Panels) Polarity Insensitive Circuitry, Dual Voltage Panels (24 or 48Vdc Batteries), High Capacity 1/4" Stud Input Blocks, Offset Output Blocks, Cable Tie Bars, Spare Fuse Holders (GMT), Full Rear Lexan Shield, Fuse and Input Power Fail Alarms, NEBS Approved
NPGMT1012 Fuse Panel, DC power distribution, 30 Circuit, 2 Isolated and Polarity Insensitive Busses, ± 24 or ± 48Vdc , 15 GMT/Buss (20Amp GMT max.), 100 Amp/Buss, 1 RU 19" or 23" Rack mount/Flush and offset mounting options, NEBS level 3 verified, with zone 4 earthquake. 
NPGMT1107  Fuse Panel, DC power distribution, 20 Circuit, 2 Isolated and Polarity Insensitive Busses, ± 24 or ± 48Vdc , 10 GMT/Buss, 100 Amp/Buss, 1 RU 19" or 23" Rack mount/Flush and offset mounting options, NEBS level 3 verified, with zone 4 earthquake. 
NPTPA1105  Fuse Panel, DC power distribution, 20 Circuit, 2 Isolated and Polarity Insensitive Busses, ± 24 or ± 48Vdc , 6 GMT/Buss (18/100 to 20 AMP), 4 TPA/Buss (3 to 50 Amp), 200 Amp/Buss, 1 RU 19" or 23" Rack mount/Flush and offset mounting options, NEBS level 3 verified, with zone 4 earthquake. 
NPTFD1009  Fuse Panel, DC power distribution, 4 Isolated and Polarity Insensitive TLS Fuse Positions, - 24 or - 48Vdc , TFD style fuse holders (up to125 Amps each and 500 Amps/Panel), Accepts TLS Fuses (up to 125 Amps) or TPS Fuses (up to 70 Amps),1 RU 19" or 23" Rack mount/Flush and offset mounting options, NEBS level 3 verified, with zone 4 earthquake. 
N250108-NCY Fuse Panel, GMT, Dual Bus for +/-24 or +/-48VDC, 19"/23" rack , 1 RU, 6 GMT/Panel, 4 GMT/Bus, 120 Amps/Panel, input Block two 1/4" studs, Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N250110-NCY Fuse Panel, GMT, Dual Bus for +/-24 or +/-48VDC, 19"/23" rack , 1 RU, 10 GMT/Panel, 5 GMT/Bus, 150 Amps/Panel, input Block two 1/4" studs, Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N250110-N/803 Fuse Panel, GMT, Dual Bus for +/-24 or +/-48VDC, 19"/23" rack , 1 RU, 10 GMT/Panel, 5 GMT/Bus, 100 Amps/Panel, input Block two 1/4" studs, Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N21C110-NCY Fuse Panel, GMT, Dual Bus for +/-24 or +/-48VDC, 19"/23" rack , 1 RU, 10 GMT/Panel, 5 GMT/Bus, 200 Amps/Panel, input Block two 1/4" studs, Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4, w/special GMT fuseholder for upto 20 Amps.
N250120-N/L9 Fuse Panel, GMT, Dual Bus for +/-24 or +/-48VDC, 19"/23" rack , 1 RU, 20 GMT/Panel, 10 GMT/Bus, 200 Amps/Panel, input Block two 1/4" studs, Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N250120-N/L33 Fuse Panel, GMT, Front Access, Dual Bus for +/-24 or +/-48VDC, 19"/23" rack , 2 RU, 20 GMT/Panel, 10 GMT/Bus, 200 Amps/Panel, input Block two 1/4" studs, Output #6 screw term.(front), Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N250124-NCY Fuse Panel, GMT, Dual Bus for +/-24 or +/-48VDC, 19"/23" rack , 1 RU, 24 GMT/Panel, 12 GMT/Bus, 200 Amps/Panel, input Block two 1/4" studs, Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N250128-NPY Fuse Panel, GMT, Dual Bus, Positive Voltage, for +24 or +48VDC, 19"/23" rack , 1 RU,Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N250140-N/L34 Fuse Panel, GMT, Dual Bus for +/-24 or +/-48VDC, 19"/23" rack , 1 RU, 40 GMT/Panel, 20 GMT/Bus, 200 Amps/Panel, input Block two 1/4" studs, Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N250140-NCY/M3 Fuse Panel, GMT, Dual Bus, Negative Voltage, for -24 or -48VDC, 19"/23" rack , 1 RU, 40 GMT/Panel, 20 GMT/Bus, 200 Amps/Panel, input Block two 1/4" studs, Output #26 AWG to 14 AWG, Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N11C120-NCY Fuse Panel, GMT, Single Bus for +/-24 or +/-48VDC, 19"/23" rack , 1 RU, 20 GMT, 100 Amps, input Block two 1/4" studs, Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N215112-NCY Fuse Panel, Combo, Dual Bus for +/-24 or +/-48VDC, 19"/23" rack , 1 RU, 2 KLM & 4 GMT/Bus, 120 Amps/Bus, Input Block two 1/4" studs, Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N21C224-NCY Fuse Panel, Combo, Full Front Access, Dual Bus for +/-24 or +/-48VDC, 23" rack , 2 RU, 2 KLM & 10 GMT/Bus, 100 Amps/Bus (50Amps/GMT Bus), Input Block two 1/4" studs, Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N215108-NCY Fuse Panel, KLM, Dual Bus for +/-24 or +/-48VDC, 19"/23" rack , 1 RU, 8 KLM/Panel, 4 KLM/Bus, 240 Amps/Panel, input Block two 1/4" studs, Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N215116-N/L31 Fuse Panel, Combo, Dual Bus for +/-24 or +/-48VDC, 19"/23" rack , 1 RU, 8 KLM & 8 GMT/Bus, 300 Amps/Bus, Input Block two 1/4" studs, Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N215118-N/L11 Fuse Panel, Combo, Dual Bus for -24 or -48VDC, 19"/23" rack , 1 RU, 4 TPA & 5 GMT/Bus, 200 Amps/Bus, Input Block two 1/4" studs, Output #6 screw term., Alarm Connection #6 screw term., Nebs level 3, Earthquake Zone 4
N215120-NCY Fuse Panel, Combo, Dual Bus for +/-24 or +/-48VDC, 19"/23" rack , 1 RU, 4 TPA & 6 GMT/Bus, 100 Amps/Bus, Input Block two 1/4" studs, Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N280116-NCY Fuse Panel, Type 70, Dual Bus for +/-24 or +/-48VDC, 19"/23" rack , 1 RU, 16 Type 70/Panel, 8 Type 70/Bus, 160 Amps/Panel, input Block two 1/4" studs, Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N280116-N130CY Fuse Panel, Type 70, Dual Bus for +/-130VDC, 19"/23" rack , 1 RU, 16 Type 70/Panel, 8 Type 70/Bus, 160 Amps/Panel, input Block two 1/4" studs, Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N280116-N105CY Fuse Panel, Type 70, Dual Bus for 90VAC Superimposed ringing, 19"/23" rack , 1 RU, 16 Type 70/Panel, 8 Type 70/Bus, 160 Amps/Panel, input Block two 1/4" studs, Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N21C120-FCY Fuse Panel, GMT Dual Bus, 10/10, 20 Amp, Filtered, Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N21C120-NCY  Fuse Panel, GMT Dual Bus, 10/10, 20 Amp, Non-Filtered, Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N215118-NCY  Fuse Panel, Combo, 4/4 TPA and 6/6 GMT, Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N215124-NCYM1 Fuse Panel, Combo, 2/2 KLM and 10/10 GMT, Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N215228-NCY Fuse Panel, Combo, 4/4 TPA and 10/10 GMT, 2 RU,Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N250110-N130CY Fuse Panel, Dual Bus, 5/5 GMT, 130Vdc,Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N250120-N/0909 Fuse Panel, Dual Bus, 10/10 GMT, 20A per position, 130Vdc,Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N250120-N130/L33 Fuse Panel, Dual Bus, 10/10 front access GMT, 130Vdc,Output #6 screw term., Alarm Connection Wire wrap, Nebs level 3, Earthquake Zone 4
N07008-CBP Load Center, 8/8 AM Breaker, 4/4 GMT Fuse Panel, 19"/23" Rack Mount, Stand Alone Application
N07011-BRP Panel, Return, Battery Return 8/8
00021-CBP Breaker Panel, CD type, Dual Bus for -24 or -48VDC, 19" rack, 5 RU, 12 CD/Panel, 6 CD/Bus, 800 Amps/Panel, Input two 3/8" holes on 1" centers, output two 3/8" PEM nuts/breaker, Stand Alone
99045-CBP Breaker Panel, CD type, Dual Bus for -24 or -48VDC, 23" rack, 5 RU, 16 CD/Panel, 8 CD/Bus, 800 Amps/Panel, Input two 3/8" holes on 1" centers, output two 3/8" PEM nuts/breaker, Stand Alone
N07008-CBP Breaker Panel, AM type Breaker & GMT Fuse, Dual Bus for -24 or -48VDC, 19"23" rack, 4 RU, 16 AM Breakers & 8 GMT Fuses/Panel, 1200 Amps/Panel, Input two 3/8" holes on 1" centers, output two 1/4" PEM nuts/single breaker & two 3/8" Studs on 1" centers for Double breakers, Stand Alone
Converter Panels Noran Tel Power Converter Panels provide efficient power conversion and distribution of DC power in one small panel. These panels convert the AC or DC power available at your site to the DC voltage you require. (For your specific configuration visit http://www.norantel.com and go to ordering info for converter panels).
Battery Distribution Fuse Bays The Noran Tel Mini BDFB provides up to 600 Amps of DC power per bus to the load side equipment (typically 2 busses per bay). Power is distributed through TPS fuse panels installed in the bay. (For your specific configuration visit http://www.norantel.com and go to the BDFB technical practice, Table 1, ordering info.).
25C218-NCY Fuse Panel, High Current, Combo, Dual Bus for -24 or -48VDC, 19"/23" rack, 2 RU, 2 TPC & 5 GMT/Bus, 1000 Amps/Panel, Input two 3/8" holes on 1" centers, Output TPC:two 1/4" holes on 5/8" centers. GMT: #30-#10 awg wire
Fuses, Circuit Breakers, Lugs, Connectors and more For part #s and ordering information visit http://www.norantel.com and go to the Power Distribution Products, Accessories.
Fuses and Breakers for DC Power Distribution
Model Number Item Description
009-000001 Fuse GMT 1/2A Red
009-000003 Fuse GMT 1/4A Violet
009-000005 Fuse GMT 3/4A Brown
009-000007 Fuse GMT 1 1/3A White
009-000008 Fuse GMT 2A Orange
009-000009 Fuse GMT 3A Blue
009-000010 Fuse GMT 5A Green
GMT Fuses Fast-Acting, Alarm Indicating Fuse, Rated to 60Vdc or 125Vac
KLM Fuses Fast-Acting, 13/32" x 1-1/2" Fuse, Rated to 500Vdc or 500Vac (KLM is similar to KTK, only with a DC certification/rating
TPS Fuses Rated for 170Vdc
TPA Fuses Alarm Indicating Fuse, Rated for 170Vdc
TPC Fuses Alarm Indicating Fuse, Rated for 80Vdc
AM Breakers Circuit Breaker, Hydralic and Magnetic, rated at 80Vdc
CD Breakers Circuit Breaker, Hydralic and Magnetic, rated at 125Vdc
IMG Breakers Circuit Breaker, Hydralic and Magnetic, rated at 80Vdc
Lugs and Connectors Locking Fork Connectors and Two Hole Lugs
A90-36FI210 In Line Filter Excelsus 330 Single
A90-36FK210 ADSL Home Filter Kit Excelsus 330
A90-36FK400C Self Install Filter Kit
A90-36FW201 Wall Phone Micro Filter Excelsus